Categories
Wellness

What contaminants are lurking in your water?

“Is my water safe to drink?” –this is something we all wonder on occasion. We like to think our water is clean and free of contaminants, but what exactly is in tap water?

Sometimes we can taste the heavy metals in our tap water, a strong chlorine smell, or even feel the dirt and silt as we’re gargling the water down. Sometimes we don’t taste, smell or feel anything in the tap water, but this doesn’t always mean it’s safe to drink.

Contaminants or waterborne pollutants aren’t always detectable by our human senses, so waterborne illnesses sometimes are attributed to other external factors instead of the water source. The United States Environmental Protection Agency (EPA) notes that water sources near agricultural or industrial plants may contain pollutants from these facilities like pesticides, fertilizers, lead, or other chemicals. Furthermore, the Centers for Disease Control and Prevention (CDC) identifies potential health risks from contaminated water—such as increased cancer risk, reproductive issues, and impair organ function, to name a few.

In an article by the New York Times, scientists like Dr. Griffiths, the former chairman of the EPA’s Drinking Water Committee noted that there are thousands of chemicals, viruses and microbes that the EPA has not even begun to assess, which leaves a big question mark on whether or not our water is safe. There is a slew of contaminants that can be harmful to your health. Constantly ingesting these contaminants can lead to chronic illnesses, cancer, and other health issues. To better understand what’s in our water, let’s start with the most common contaminants in tap water.

Lead

Lead can contaminate water through lead service lines that connect the home to main water lines, or from other plumbing systems soldered with lead. Some drinking water fountains, lab faucets, sinks, hoses, and spigots are connected to lead-lined water tanks. Aging pipes and corrosion of household plumbing systems can lead to lead pollution in water. The CDC notes that lead is a toxic metal and can be harmful to human health even at low levels so the maximum contaminant level is set to zero. Despite this, some water goes unregulated; this is evident in the case of the water crisis in Flint, Michigan.

For those of you who don’t know, the residents of Flint have been served lead-polluted water for several years now. In fact, the National Resources Defense Council (NRDC) points out that “nearly 9,000 children were supplied lead-contaminated water for 18 months”—a severe detriment to the health of those children and many other residents of the area. Make no mistake—Flint is just one case where lead poisoning is widespread. Many cities across the country are faced with varying levels of lead in their water.

Chlorine

Water treatment facilities add chlorine as an antimicrobial agent. Chlorine deters the growth and presence of bio-contaminants like bacteria, viruses, and mold. Failure for municipalities to regulate sufficient amounts of chlorine in water mains can lead to waterborne illnesses and bacterial contamination. Flint faced a similar issue where levels of fecal coliform bacteria were discovered in city water. Adding more chlorine, however, is not the be-all-end-all. Chlorination of water can elevate levels of total trihalomethanes (TTHM), by-products of chlorination known to cause cancer. In a 2008 study, scientists determined that the presence of chlorinated disinfection by-products in drinking water was an issue of public health, posing health risks such as cancer in males and adverse developmental effect on infants.

Fluoride

Fluorides are compounds of the element fluorine with another substance. They can naturally occur in the ground, air, water and even plant and animal sources. Fluoridation of water began in the US in 1945 when scientists noticed that people living in areas with high fluoride levels had fewer cavities. That should be a good thing, right? Natural drinking water sources in the US also have fluoride in them, but some areas contain more fluoride than others. In fact, long-term exposure to high levels of fluoride can result in a condition known as skeletal fluorosis–fluoride build-up in the bones. Fluoride tends to collect in parts of the body with high levels of calcium resulting in joint stiffness, pain, and this brittleness can cause weak bones and fractures in older adults.

Mercury

Mercury is a toxic element that can be found in waterways near refineries, factories, landfills, and cropland. High levels of mercury exposure can lead to kidney damage, brain damage, and damage to a developing fetus. Other health effects include effects on brain function, vision, hearing, or memory issues.

Cadmium

Cadmium naturally occurs in zinc, lead and copper ores, in coal and other fossil fuels, and in shales released during volcanic activity, which come in contact with water sources. However, cadmium can release into the water during the corrosions of galvanized pipes, discharged from metal refineries, and be a result of runoff from waste batteries and paints. When consumed long-term, it can cause kidney, liver, bone, and even blood damage.

Copper

Your body needs copper to stay healthy, but too much is harmful to your health. High levels of copper in your drinking water can not only leave an unfavorable metallic taste, but it can also cause nausea, vomiting, diarrhea, gastrointestinal issues, and headaches.

Zinc

Zinc is an essential nutrient for the body—of course in the right volumes. However, ingesting zinc in high levels of zinc can cause stomach cramps, nausea and vomiting. You might experience the taste in tap water (it’s chalky in appearance). Contamination usually occurs from hazardous waste sites.

Benzene

Benzene is released into water from atmospheric deposition, petrol spills and other petroleum products, and chemical plant effluents. Based on a study by the WHO, benzene has been detected in 50-60% of potable water samples from 30 treatment facilities across Canada. It can also be formed naturally through volcanoes and forest fires and is a natural part of cigarette smoke, crude oil, and gasoline. Benzene is also used as a solvent in dry cleaning, paints, printing, etc. Benzene enters water as discharge from industrial factories or leaching from landfills and gas storage tanks. Repeated exposure at low levels of benzene produces toxic levels in the blood and blood-forming tissues.

Asbestos

Sources of asbestos contamination in drinking water include the dissolution of asbestos-containing minerals and ores, industrial effluents, atmospheric pollution, and A/C pipes in water distribution systems. This substance was used in cement pipes to distribute water across the US. As the water pipes decay, the substance is released into the water. According to a water sanitation study by the WHO, most of the US population consumes drinking water containing asbestos below 1 MFL, and suggests that most raw and treated waters in the United Kingdom contain asbestos up to 1 MFL. Asbestos is a known carcinogenic contaminant and may lead to cancer in humans.

VOCs

VOCs, also known as Volatile Organic Compounds include a slew of chemicals. Organic chemicals are widely used in various industries and products like paints, varnishes, wax, disinfecting, and even cosmetic products. Since there is such a wide variety of pollutants, health risks also vary greatly depending on levels of exposure and length of time exposed. Some effects include eye, nose and throat irritation, headaches, loss of coordination, nausea, liver, and kidney damage.

Radon

Radon is a known cancer-causing substance found in water from wells. Approximately half of the drinking water in the US comes from groundwater that is tapped by wells. The water moves through the soil and natural uranium releases radon to the water. As a result, water from wells usually contain more radon than surface water (lakes and streams).

Bio-contaminants

Bio-contaminants include microorganisms such as bacteria, viruses, and mold. These contaminants can develop organically in water (they LOVE water). Moist areas become the perfect breeding ground for bio-contaminants, which can lead to illnesses and other waterborne diseases. Without antimicrobial agents like chlorine, water is left vulnerable to bio-contamination, which is why the treatment of water with chlorine is so widespread in certain areas.

Bio-contamination perhaps proposes a more serious risk for most of the world. In an article by the Guardian, Microbiologist Joan Rose experienced first-hand the tragedies that can come from bio-contamination in water. In Walkerton, Canada’s worst-ever water pollution incidents, two pathogens entered into the water supply and many of the small town’s residents fell ill and some even died. This was caused by runoff from local agriculture. Incidents like this stem from overall pollution and increased waste around the world. Most waste goes into water, which introduces different waterborne diseases, viruses, and pathogens which are making people sick at alarming rates.

Pharmaceuticals

The EPA lists pharmaceuticals as potentially risky contaminants in water. Prescription drugs and over-the-counter medications get into lakes, rivers, and streams, whether they are flushed down the toilet or down sink drains. A Harvard Health Letter indicates that water quality experts and environmental advocates are becoming increasingly concerned with the effects of this on human health. Compounds such as estrogen have been linked to sexual changes in fish. The potential health risk for humans of pharmaceutical remnants in water is currently unknown and being monitored as a public health matter.

Our aging water infrastructure has health consequences.

In the U.S., water safety standards are currently based on decades-old studies. Despite all these efforts to regulate levels of contaminants, 27 million Americans are served by water systems violating health standards established by the Safe Drinking Water Act.

Additional contaminants that emerge from the water mains and pipes in aging homes are never reported in municipal water quality reports. As a result, 19 million people become ill each year due to contaminated water. In fact, a 2012-2014 study found that nearly 21,000 municipalities across the U.S. issued Boil Water Advisories (BWA) for microbial contamination. On a global scale, over 3 million people in the United States, United Kingdom, Netherlands, and  Canada have received BWAs.

These issues contribute to an environmental crisis

Since the LARQ Bottle launched in 2018, more than 95,637,301 single-use plastic water bottles have been saved from entering the landfill. Unfortunately, during the same time nearly 1,000,000,000,000 (that’s a trillion with a capital T) single-use plastic bottles have been tossed away–likely due to inaccessibility to clean drinking water.

Categories
Sustainability

32 Ways to Conserve Water at Home

Even as World Water Day passes (March 22), water conservation should continue to be a hot topic of discussion around the world. World Water Day is all about bringing awareness to communities that lack access to water and proper water sanitation and hygiene. For those of us who are lucky enough to have access to clean fresh water, we need to be more informed about ways to conserve this natural resource.

So, how do we get green about this whole water-saving business? Well, put your flushes where your mouth is and take into account all those leaky pipes, dripping faucets, showerheads, and appliances. How much of an environmental impact do these have? The fact is, every drop counts, and we’re here to lay down these water conservation tips on you.

How to Conserve Water

 


Photo by Charles on Unsplash

In the Kitchen

  • Only use the dishwasher when you have full loads
    Running your dishwasher on a half-load is wasteful. Opt to wait until you have a full load to start a cycle.
  • Install a high-efficiency dishwasher 
    Dishwashers made before 1994 waste more than 10 gallons of water per cycle according to Energy Star. Look for the Energy Star seal when shopping for a new dishwasher. These will save energy, water, and shave off about $35 per year off your utility bills.
  • If hand-washing dishes, don’t let the water run 
    You can shorten the time it takes to wash dishes by using a basin of soapy water to soak, then rinsing the dishes in running water quickly after. Because you’re not running the water the entire time through soap, scrub, and rinse, you are cutting the amount of water being used. Depending on your hand-washing methods, it might save more energy and water to use a high-efficiency dishwasher.
  • Re-use pasta or rice water
    Instead of pouring the hot pasta water down the drain, save it in a tub, wait for it to cool, and then use it to water your plants. Don’t pour hot water onto plants–this might harm or kill them! Similarly, save the water you used to wash your rice for this same purpose.
  • Scrape and soak instead of pre-rinsing
    If you’ve got some tough stains, pre-rinsing might not even help. Sometimes you need to let things sit in warm soapy water for the set in stains, oil, and leftover food to dissolve. They’ll become easier to wash too so you won’t be standing there scrubbing for long!
  • Avoid using the garbage disposal
    The garbage disposal requires running water to prevent clogged drains, which can be using up water unnecessarily. A greener way to dispose of food particles would be to use a strainer and keeping a compost bin nearby to throw these bits out. You might even save some headache from a clogged drain a little down the line.

 


Photo by Charles on Unsplash

In the Bathroom

  • Shower Buckets
    Ever turn the shower on to heat up before hopping in? We’re all a little guilty of doing this at least once in our lives. All that cold shower water running down can be saved in a large tub or basin and repurposed for watering plants, handwashing clothes, washing your car, washing your pet or soaking dishes.
  • Shower Timer
    If you haven’t already gotten in the habit of taking speed showers, now’s the time. Try setting a timer on your phone or shower clock. You can even make this fun by getting a shower speaker–finish your shower within 1-2 songs!
  • Turn off the faucet while you’re brushing your teeth
    The most water you’ll need is maybe a small glass to rinse your mouth and toothbrush afterward. Be mindful of every drop of water you might be wasting.
  • Shut off the shower when you’re lathering
    Just like the dishes, do a soapy lather on yourself in between rinses. This will save gallons of water from going down the drain.
  • Install low-flow showerheads
    The higher the flow, the more water is being used. Investing in low-flow showerheads will avoid unnecessarily water-intensive showers which are extremely wasteful. These will also help you save some money off your water bill!
  • Install high-efficiency toilets
    These days, high-efficiency toilets are available in all sorts of water-saving options. From low-flush toilets to dual-flush toilets, to water-efficient toilet tanks and more. Since older standard toilets can attribute to most of your home water consumption, this may be a worthwhile investment to look into for the long run. You’ll save money off your water bill for this one, too.
  • Install faucet aerators
    What’s a faucet aerator, you ask? It’s an attachment you can install into any standard faucet and incorporates air into the water stream in order to save water. It’s another way of controlling the flow of water so less is used. Usually, for indoor water use, these are great for the bathroom, kitchen and other faucets in the home.

    Photo by Ben Konfrst on Unsplash

 

Outdoors

  • Install a rain barrel 
    Save some of that rainwater to be repurposed later. You can have one installed by professionals, or merely leave some buckets outside to fill up with as much water as possible while it’s raining outside.
  • Drought-resistant plants 
    Plants can require a lot of water to stay alive or grow. Reduce the size of your lawn (or forego the lawn altogether) or opt for plants that require less water or that thrive in drought conditions. Succulents and other desert plant species are great options.
  • Water plants in the morning 
    Watering plants in the morning (while it’s still cool), allows the water to run down into the soil to reach the roots of the plants without losing too much water to evaporation in the process.
  • Cover your pool 
    If you have one, cover it. The water can evaporate over time which would require more water to refill.
  • Wash your dog outdoors 
    Your pup will probably enjoy it a little more outside anyway, but the bath water can run off into your lawn or plants so it’s not going to waste. Just make sure the doggy body wash is safe for your pet and your plants.
  • Hand-water your plants
    Instead of using the hose or sprinklers, take it upon yourself to water your plants (bonus points for using repurposed water)!
  • Go to a car wash instead of washing your car at home
    Some car washes use low-flow washing systems that are better for the environment than if you hosed your car at home. If you’ve saved up enough shower water or rainwater though, you could use it to wash your car at home!
  • Look into irrigation systems 
    If you’re apt to do so, installing an irrigation system in your yard or garden can be a great way to save money and properly nourish your plants. Some have built-in rain sensors to prevent over-watering your plants after it has rained, and will distribute water efficiently so there is significantly less water waste than traditional sprinkler systems.

In the laundry room

  • Cut back on laundry days 
    Try to do the laundry once a week or less. The washing machine uses a lot of water and energy to run, so reducing the frequency of laundry days will conserve water and save you money on your utility bills.
  • Do full loads only
    Always do full loads. Running half a load will take the same amount of energy and water to do. As an alternative, you can handwash anything that you absolutely need to wear.
  • Invest in high-efficiency washer and dryers
    Look for the Energy Star sticker on these too. You’ll save money and reduce your water footprint by getting a water-conserving machine.

 


Photo by Samuel Zeller on Unsplash

Everywhere

  • Check for and fix leaks ASAP
    Aside from the obvious, you can tell if you have a leak by checking your monthly water bill. If there’s been a spike in the price after a normal month, you might want to check your pipes. You can troubleshoot by checking your water meter–take a look at the meter, then make sure all water use stops for at least 2 hours, and check the water meter again. If the meter increases still, you have a leak somewhere. Toilets can be leaking even if you don’t see any water on your floors. To check if it’s the toilet that’s leaking, drop some food coloring in the toilet tank and wait an hour or two without using the toilet. If the coloring appears in the toilet bowl, you have a leak.
  • Install efficient fixtures and appliances 
    Did you know that power plants use water to cool down? So whether your fixture or appliances use water or not, you may be indirectly conserving water just by reducing your energy use.
  • Turn off the faucet
    Even if you aren’t at home, be conscious of the water you’re using. We’re not telling you to not wash your hands, we’re just saying that you should soap and lather while the faucet is off, then only turn it on to rinse.
  • Double-check
    This goes for at home and when you’re out. Always check to see if the faucet or shower is dripping before you leave your home, hotel, Airbnb, public restroom–you name it. Unnoticed leaky faucets can waste more water than you’d think.
  • Don’t buy bottled water
    Bottled water–oftentimes left unfinished at parties or at work, leave water wasted and add to plastic pollution. Instead, get a reusable water bottle, and bring it with you everywhere. If you’re throwing a party, don’t be afraid to put out filtered water in a pitcher or water dispenser, and supply paper cups instead of plastic ones.
  • Repurpose your water
    If you’re cleaning up after a party where you did supply bottled water, be conscious of what you do with the abandoned bottles. Repurpose the drinking water by using it to water plants, your lawn, or your car. Then, properly recycle the empty bottles.
  • Use less hot water
    In the shower, laundry, and kitchen, hot water uses more energy to produce that cold or lukewarm water. Save water from the shower by reducing shower time, don’t use hot water for laundry (most clothes allow cold water only anyway), and try to limit the hot water usage when washing dishes.
  • Re-use greywater
    Greywater (also spelled as grey water, gray water or graywater) is untreated gently used water from bathroom sinks, showers, basins, and washing machines. It is not water from toilets, urinals or kitchens due to the amount of human excrement, grease-levels, and potential for bacterial growth. Greywater is typically filtered to remove any solid sediment but not treated with harsh chemicals. You can re-route greywater for use in other areas if it is legal where you live. You can save money by re-purposing greywater around your home.

And there you have it, easy water saving habits that you can start practicing right now and everywhere. You can find new and creative ways of repurposing and conserving water in your daily life. When doing so, you can reduce your environmental impact and help conserve a valuable natural resource.